iFTI LMS

POSTPONED: FTI 1111C OVERTON Rigging-Lifts-Forklift-Hand Signaling IN PERSON SESSION (Hands-on Only) 02102021
2021-02-10 08:00 - 2021-02-12 16:00 (America/New_York) | International Finishing Trades Institute Training Center, 7230 Parkway Drive, Hanover, MD, 21076, United States
24 Hours
Prerequisite: COR 1126C Overton Rigging and Signaling (Strongly Recommended) Completion of online Training Sessions with Overton

ENROLL NOW: Ask your DoT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

FTI 1156 Lead Awareness TTT 02092021 (Online)
2021-02-09 13:30 - 16:30
3hrs
Prerequisite: None
This class will give instructors a better understanding of the harmful aspects of lead, and increase their understanding of its impact on workers in both general industry and construction trades. These benefits can be applied to courses instructors teach that may contain the topic of lead.
This is a lead awareness course that contains a closer look at its prevalence in the work and public environments. It will also present a toxicological profile of lead, increasing participants understanding of why they should avoid exposure. The course will review pertinent worker protections through a review of the general industry and construction standards, and present an example lead control plan for work on superstructures.
ENROLL NOW: Ask your DOT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

FTI 175 Respiratory Protection 02032021
2021-02-03 09:00 - 11:00
3hrs
Participants will gain an understanding of different aspects of respiratory protection through facilitated lecture, discussion and small group activities. Topics will include: respiratory protection programs, what respirators are and why you need them for work, how to properly don/doff respirators, cleaning maintenance and storage. Additionally, Federal regulations and best practices will be discussed along with a deeper exploration of different technical aspects of respiratory protection including, how they work and how to ensure you have the correct one for your work conditions. The course will use practical resources such as the NIOSH respirator decision logic and techniques such as calculating maximum use concentrations.

ENROLL NOW: Ask your DOT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

FTI 1100 Health and Safety Management
2021-01-20 13:00 - 15:00
3hrs
This three-hour course will introduce fundamental aspects of health and safety management and review common health and safety management systems. It will also touch on risk reduction by “prevention through design”. The course will conclude with a small group activity which will focus on integrating health and safety management systems into construction. This course will be a benefit to trainers who deliver health and safety related courses or to IUPAT members who have health and safety responsibilities at their DC or LU.
Prerequisite: None
ENROLL NOW: Ask your DOT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

FTI 1149 Introduction to Toxicology for Occupational Health and Safety
2021-01-14 13:00 - 16:00
3hrs
This is Train- the- Trainer course on toxicology is designed to give participants a foundational understanding of how chemicals affect the body. Trainers can utilize the practicality of this course when teaching various COR classes under the Health and Safety topics related to work safety and exposures. Topics covered include how chemicals enter and distribute throughout the body, toxicological principles of how chemicals cause harm, how chemicals are eliminated and how toxicology relates to occupational health and safety. The course is designed for three hours with facilitated lecture and a small group activity to reinforce the toxicological concepts covered and allow participants to apply what they have learned. This course will help to develop a better understanding of chemical harm in relation to occupational health and safety issues such as hazard communication, worker exposure limits and hazard control measures. Health and safety representatives will benefit from this course as well as the general membership as their general understanding of chemical harm will be increased.
Prerequisite: None
ENROLL NOW: Ask your DOT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

FTI 1133 Introduction to Chemical and Physical Properties of Hazardous Materials TTT 01072021 (Online)
2021-01-07 14:00 - 16:00
This course presents the basics of chemical and physical properties of hazardous materials, including basic chemistry concepts. The course will develop a solid foundation of understanding as to how chemicals behave in the environment, and how that information affects worker health and safety.
This will be useful for trainers who teach curricula where hazardous materials are discussed, such as Hazcom, exposure to Highly Toxic Chemicals (e.g. lead, asbestos, pcbs) or basic apprenticeship courses where chemicals are a part of that course such as mixing coatings, degreasing of surfaces, etc.
ENROLL NOW: Ask your DOT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

FTI 1133 Introduction to Chemical and Physical Properties of Hazardous Materials TTT 12172020
2020-12-17 14:00 - 16:00

LMS Upgrade Webinar: PHASE 1 12062020
2020-12-16 14:00 - 16:00 | International Finishing Trades Institute Training Center, 7230 Parkway Drive, Hanover, MD, 21076, United States
LMS Upgrade Webinar: Phase 1 Rollout
ENROLL NOW: Ask your DOT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

FTI 166 Protecting Workers from Mold 12152020
2020-12-15 14:00 - 16:00
3hrs
This an introductory to mid-level mold course. It will take an in-depth look at what molds are (including species and species characteristics), where you are likely to find them in occupational and public health settings, what their health effects are, how to protect workers and the public from them, how to reduce worker health risk when encountering them on the job, review regulations and guidance and finally, present basics of sound mold abatement strategies. This course will benefit any trainer wishing to understand more about mold at a greater depth, as well as those responsible for work development where mold may be an issue. Lastly, this is a great presentation on mold work-related issues that would benefit any IUPAT member, as mold can become an occupational issue in any field, if the conditions are right. A small group activity is included concerning mold remediation strategies. A certificate of course completion will be given for those who complete the class.
Prerequisite: None
ENROLL NOW: Ask your DOT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

FTI 5010 AGMT Prep TTT (Written) 12102020
2020-12-10 11:00 - 12:00
1.5hrs
This course will provide instruction for glazing coordinators and instructors on how to create and execute a preparation course for members to pass the AGMT Certification to ensure a maximum success rate.
ENROLL NOW: Ask your DOT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

FTI 1025 Mentorship Matters TTT 12092020
2020-12-09 13:00 - 2020-12-11 16:00 | International Finishing Trades Institute Training Center, 7230 Parkway Drive, Hanover, MD, 21076, United States
16 hours
Within the trades, mentorship is emerging as one of the most critical elements in workforce development. This two-day Mentorship Matters™ Train-the-Trainer program is divided into two separate workshops – Six Steps to Mentoring (4hrs) and Six Skills for Apprentices (4hrs) and will provide the tools to effectively deliver this program. The goal of these training sessions is to maximize effectiveness of communication and skill transfer between the new worker, and the mentor.
The core of the Mentorship training program is divided into two four hour workshops. One workshop, will help journeypersons define mentorship, learn the qualities of a good mentor, and to understand the role that mentorship has in developing on the job skills, quality, safety, and productivity.
The second workshop is for the mentee apprentice. They will learn how and when to ask questions of their mentor, how to communicate effectively, set goals, and the importance of a strong work ethic.
ENROLL NOW: Ask your DOT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

FTI 1145 PCB Awareness TTT 12072020
2020-12-07 10:00 - 2020-12-11 12:00
10 Hours
Prerequisite: None
ENROLL NOW: Ask your DOT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

FTI 5010 AGMT Prep TTT (In Person) Course
2020-12-02 08:00 - 2020-12-03 17:00
In collaboration with District Council 21, the iFTI is introducing the new FTI 5010 AGMT Prep TTT Course. This course will provide instruction for glazing coordinators and instructors on how to create and execute a preparation course for members to pass the AGMT Certification to ensure a maximum success rate.
ENROLL NOW: Ask your DOT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

FTI 1156 Lead Awareness TTT 11182020
2020-11-18 14:00 - 16:00

FTI 1156 Lead Awareness TTT 11172020
2020-11-17 14:00 - 16:00

FTI 1001 Teaching Techniques for Adults 11092020 - Online
2020-11-09 18:00 - 2020-11-13 20:00 | International Finishing Trades Institute Training Center, 7230 Parkway Drive, Hanover, MD, 21076, United States
40 Hours
Instruction for year two Instructors and Coordinators of occupational training and apprenticeship. Included in the course are intermediate computers, laboratory safety, testing, and evaluation, and advanced instructional methods.
Prerequisite: FTI 1000 Introduction to Teaching Techniques for Adults
ENROLL NOW: Ask your DoT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

FTI 7902 Fundamentals of Decorative Finishing Part 2 11092020
2020-11-09 - 2020-11-13 | International Finishing Trades Institute Training Center, 7230 Parkway Drive, Hanover, MD, 21076, United States
40 hours
TBD

FTI 1111C OVERTON Rigging-Lifts-Forklift-Hand Signaling 11182020
2020-11-02 - 2020-11-05 | International Finishing Trades Institute Training Center, 7230 Parkway Drive, Hanover, MD, 21076, United States
32 Hours
This 40-hour course for company trainers wishing to provide in-house employee training. Rigging, Forklift, & Aerial/Scissor Lifts Trainer programs includes: how to bean effective trainer, classroom presentation, applying the written exam, evaluating competency, and the required paperwork and record keeping. Each course will address laws and regulations, stability principles, pre-operational inspection procedures, safe operating practices, and evaluating competency. The Rigging course will also cover most types of slings and basic rigging hardware as well as the principles, practices and techniques of basic rigging. In conclusion the course also provides additional class teach-backs and a practical hands-on training for inspection, selection and basic safe rigging techniques (Certification Period: 36 months).
Member Card Abbreviation: OVERTON Rigging and Signaling
Prerequisite: COR 1126C Overton Rigging and Signaling (Strongly Recommended)
ENROLL NOW: Ask your DoT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

CANCELLED FTI 1218 Leadership Development 10252020
2020-10-25 08:00 - 2020-10-30 17:00 | International Finishing Trades Institute Training Center, 7230 Parkway Drive, Hanover, MD, 21076, United States
40 Hours
This final core curriculum class will round out the Leadership series. This course will focus on the IUPAT District Council organizational structure, and time management. You will be able to recognize and learn how to deal with Burnout. The Adaptive Leadership training will help embrace the diversity of the workforce. The Public Speaking and Soft skills/Leadership styles will make you a more effective Labor Leader.
Prerequisite: None
ENROLL NOW: Ask your DOT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

CANCELLED FTI 1120C USACE Fall Protection 10192020
2020-10-19 - 2020-10-22 | International Finishing Trades Institute Training Center, 7230 Parkway Drive, Hanover, MD, 21076, United States
32 Hours
Upon successful completion of the classroom training the participant will be able to pass a written examination demonstrating comprehension of the basic selection, inspection and safe use of fall protections systems and materials when in accordance with Federal OSHA Laws and United States Army Corps of Engineers (USACE) EM385. They will have been trained, tested and understand the following:

Recognizing potential risks and worksite hazards for workers using fall protection and understands the appropriate actions to take.
Understand and be able to demonstrate the federal laws and basic safety rules when utilizing fall protection systems.
Understand the proper and safe use of the fall protection systems covered in this course.
Understand the selection, inspection, ratings, rejection criteria and proper safe use fall protection systems when using Aerial Work Platforms, Mobile, Overhead and/or Tower Cranes, of Forklift trucks to hoist personnel.

(Certification Period: Permanent)
Prerequisite: None
ENROLL NOW: Ask your DOT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

FTI 1146 Heat Stress (Online) 10142020
2020-10-14 14:00 - 17:00
3hrs
Prerequisite: N/A
ENROLL NOW: Ask your DOT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

FTI 1147 CPWR ICRA/COVID-19 Awareness (Online) 10062020
2020-10-06 13:00 - 2020-10-07 15:00
The course provides the necessary information to increase the health and safety awareness for construction workers who are impacted by the COVID-19 pandemic; and understand the Infection Control Risk Assessment (ICRA) procedures for properly performing healthcare or other occupied facility construction, maintenance and renovation tasks.

CANCELLED FTI 1218 Leadership Development 10042020
2020-10-04 - 2020-10-09 | International Finishing Trades Institute Training Center, 7230 Parkway Drive, Hanover, MD, 21076, United States

FTI 1119C OSHA 09212020
2020-09-21 10:30 - 2020-09-25 15:30
24 Hours
This course provides an update for currently authorized OSHA Construction Industry Outreach Trainers on topics such as OSHA construction industry standards, policies and regulations. Construction industry outreach trainers are required to attend this course once every four years to maintain trainer status (Certification Period: 48 months).
Prerequisite: FTI 1114C OSHA 510, FTI 1109C OSHA 500, or previous FTI 1119C OSHA 502
ENROLL NOW: Ask your DOT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

FTI 1146 Heat Stress (Online)
2020-09-10 13:00 - 15:00

FTI 1141Changing the Culture of Construction (Online)
2020-08-24 13:00 - 15:00
2 Hours
This training is designed to inform and empower the construction industry by separating fact from fiction and encourage our workforce to choose proactivity when it comes to behavioral health issues and addictions. Our goal is to educate individuals, in turn promoting a healthy, safe, and substance free working environment.
Prerequisite: None
ENROLL NOW: Ask your DOT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

FTI 1120C USACE Fall Protection 08242020
2020-08-24 - 2020-08-28 | International Finishing Trades Institute Training Center, 7230 Parkway Drive, Hanover, MD, 21076, United States

FTI 1148 MEWP ANSI A-92 Supplement (Online)
2020-08-20 13:00 - 14:30
1.5 Hours
Prerequisite: N/A
ENROLL NOW: Ask your DOT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

DoT 5009 AGMT (Online)
2020-08-19 13:00 - 15:00
2hrs
Prerequisite: N/A
ENROLL NOW: Ask your DoT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.

FTI 1024 Computing Applications Level 2 08172020
2020-08-17 - 2020-08-19 | International Finishing Trades Institute Training Center, 7230 Parkway Drive, Hanover, MD, 21076, United States
24 Hours
This three-day course provides intermediate (Level 2) training in Microsoft Word, PowerPoint, and Excel (8 hours per topic). This course would be the next level of training for participants who took the FTI 1023 Introduction to Computing Applications for Instructors. Courses will be taught by professionals from our local community college (AACC).
Prerequisite: FTI 1023 Introduction to Computing Applications
ENROLL NOW: Ask your DOT to complete the DOT Request – Training Registration Form. You can fill out the Instructor/Coordinator Training Registration Form but the request will be forwarded to your DOT for approval.
